IEI Technology ICECARE-05-ET-R10, User Manual

Page: 23 / 73

ICECARE-05 Pocket Mobile Field Assistant
Page 14
ƒ
Anti-static Discharge
: If a user open the rear panel of the ICECARE-05, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.3 Charging the System
To start using the ICECARE-05, the user must charge the ICECARE-05 by the power
adapter. To charge the ICECARE-05, please follow the steps below.
Step 1:
Open the protective rubber cover to expose the Micro USB port (
Figure 3-1
).
Figure 3-1: ICECARE-05 Micro USB Port
Step 2:
Connect the Micro USB plug of the Micro USB cable to the Micro USB connector
of the ICECARE-05 (
Figure 3-2
).
Step 3:
Connect the other end of the Micro USB cable to the USB connector of the
power adapter (
Figure 3-2)
.
Then plug the power adapter to a power source.
OR
connect the Micro USB cable directly to a computer.