IEI Technology ICE-BT-T10-E38151 User Manual Download Page 69

Page: 69 / 97

ICE-BT-T10 COM Express Module

Page 59

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:



Chipset



Graphics



LAN

Installation instructions are given below.

6.2 Starting the Driver Program

To access the driver installation programs, please do the following.

Step 1:

Insert the CD that came with the system into a CD drive connected to the

system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->Computer->CD Drive->autorun.exe"

Step 2:

The driver main menu appears (

Figure 6-1

Summary of Contents for ICE-BT-T10-E38151


































































































Search results

Summary of Contents for ICE-BT-T10-E38151

Reviews:

Related manuals for ICE-BT-T10-E38151

Brands by name

Popular brands

IEI Technology ICE-BT-T10-E38151, User Manual

Search results

Summary of Contents for ICE-BT-T10-E38151

Reviews:

Related manuals for ICE-BT-T10-E38151

Brands by name

Popular brands