IEI Technology IBM-Q670 User Manual Download

Page: 123 / 184

IMB-Q670 Micro-ATX Motherboard

Page 109

Enabled D

EFAULT

The onboard GbE controller is enabled

GbE PXE Boot [Disabled]

Use the

GbE PXE Boot

option to enable or disable the boot option for GbE devices.

Disabled D

EFAULT

Disables the GbE PXE Boot option

Enabled

Enables the GbE PXE Boot option

Restore on AC Power Loss [Power Off]

Use the

Restore on AC Power Loss

BIOS option to specify what state the system

returns to if there is a sudden loss of power to the system.

Power Off

The system remains turned off

Power On

EFAULT

The system turns on

Last State

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Resume on PCIe Wake [Enabled]

Use the

Resume on PCIe Wake

option to enable or disable resuming from the PCIe wake

message and WAKE# signal.

Disabled

Disables Resume on PCIe Wake option

Enabled D

EFAULT

Enables Resume on PCIe Wake option

Resume on PME/GbE [Enabled]

Use the

Resume on PME/GbE

option to enable or disable resuming from PCI PME#,

on-chip GbE controller, or other on-chip devices.

Disabled

Disables Resume on PME/GbE option

Enabled D

EFAULT

Enables Resume on PME/GbE option

Summary of Contents for IBM-Q670

























































































































































































Search results

Summary of Contents for IBM-Q670

Reviews:

Related manuals for IBM-Q670

Brands by name

Popular brands

IEI Technology IBM-Q670, User Manual

Search results

Summary of Contents for IBM-Q670

Reviews:

Related manuals for IBM-Q670

Brands by name

Popular brands