IEI Technology IBM-Q670 User Manual Download

Page: 179 / 184

IMB-Q670 Micro-ATX Motherboard

Page 165

CAUTION!

Do not accidentally disconnect the SATA drive cables. Carefully route

the cables within the chassis to avoid system down time.

F.2 Features and Benefits

Supports RAID levels 0, 1, 5 and 10

Supports connectivity to two or more disk drives

Supported Operating Systems include: Windows XP, Windows Server 2003

and Windows Vista

F.3 Accessing the Intel® Matrix Storage Manager

To access the Intel

Matrix Storage Manager, please follow the steps below.

Step 1:

Connect SATA drives to the system

. Connect two or more SATA drives to the

system. Make sure the drives have the same capacity, are the same type and

have the same speed.

NOTE:

Make sure the SATA drives are EXACTLY the same when they are

configured in a RAID configuration. If they are not the same size, disk

drive capacity is sacrificed and overall performance affected.

Step 2:

Enable SATA drives in BIOS

. Start the computer and access the BIOS setup

program. Enable RAID support for all SATA devices. Refer to the applicable

BIOS configuration section in this user manual.

Step 3:

Configure “Option ROM Messages”

BIOS

option to

Force BIOS

. This is to

allow the “Press <CTRL+I> to enter Configuration Utility……” message to

Summary of Contents for IBM-Q670

























































































































































































Search results

Summary of Contents for IBM-Q670

Reviews:

Related manuals for IBM-Q670

Brands by name

Popular brands

IEI Technology IBM-Q670, User Manual

Search results

Summary of Contents for IBM-Q670

Reviews:

Related manuals for IBM-Q670

Brands by name

Popular brands