IEI Technology HTB-200-C236, User Manual

Page: 101 / 113

HTB-200-C236 Embedded System
Page 89
B.1.4 Classification

Power by Class I power supply (IEI, HTB-200-C236)

No Applied Part.

No protection against the ingress of water: IPX0

Mode of operation: Continuous Operation
The equipment not suitable for use in the presence of a flammable anesthetic mixture with
air or with oxygen or nitrous oxide: Not AP or APG Category.
B.2 Maintenance and Cleaning Precautions
When maintaining or cleaning the HTB-200-C236, please follow the guidelines below.
WARNING:

For safety reasons, turn-off the power and unplug the embedded
system before cleaning.

If you dropped any material or liquid such as water onto the
embedded system when cleaning, unplug the power cable
immediately. Always make sure your hands are dry when
unplugging the power cable.
B.2.1 Maintenance and Cleaning
Prior to cleaning any part or component of the HTB-200-C236, please read the details
below.

To clean the HTB-200-C236,
o
remove dirt with a lightly moistened cloth. Then wipe the external chassis
with a soft dry cloth.
o
use 75% ethanol alcohol to clean the external chassis.

Cleaning frequency: follow the cleaning method guidelines of the hospital.

Never spray or squirt liquids directly onto any other components.

The interior of the device does not require cleaning. Keep fluids away from the
device interior.

Be cautious of all small removable components when vacuuming the device.