IEI Technology HTB-200-C236, User Manual

Page: 36 / 113

HTB-200-C236 Embedded System
Page 24
3.7 System Configuration
The system configuration should be performed before peripheral device installation.
3.7.1 Clear CMOS
If the HTB-200-C236 fails to boot due to improper BIOS settings, the clear CMOS button
clears the CMOS data and resets the system BIOS information. To do this, remove the
system top cover first (see
Section 0 ). Locate the clear CMOS button and push the button
for three seconds, then restart the system. The clear CMOS button location is shown
in
Figure 3-16 .
Figure 3-16: Clear CMOS Button
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:

Enter the correct CMOS setting

Load Optimal Defaults

Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.