IEI Technology HTB-100-HM170, Quick Installation Manual

Page: 7 / 16

6
Installation Precautions
When installing the medical embedded system, please follow the
precautions listed below:

Manufacturer authorization : Do not modify this equipment
without authorization of manufacturer.

Read the user manual
: The user manual provides a complete
description of the medical embedded system, installation
instructions and configuration options.

DANGER! Disconnect Power : Power to the medical embedded
system must be disconnected during the installation process.
Failing to disconnect the power may cause severe injury to the
body and/or damage to the system.

Certified Engineers : Only certified engineers should install and
modify the hardware settings.

Power turned off : When installing the medical embedded system,
make sure the power is off. Failing to turn off the power may cause
severe injury to the body and/or damage to the system.

Anti-static Discharge : If a user open the top cover of the medical
embedded system, to configure the jumpers or plug in added
peripheral devices, ground themselves first and wear an anti-static
wristband.
Grounding Cable Connection
To protect the HTB-100-HM170 from static electricity, the grounding cable
that came with the system has to be connected. To connect the grounding
cable, please follow the steps below.
Step 1: Connect the grounding cable to the equipotentiality terminal on the
rear panel of the HTB-100-HM170 (Figure 3 15).
Step 2: Use the hand clamp on the other end of the grounding cable to clip
on the Earth’s conductive surface.
Mounting the System
WARNING:
The HTB-100-HM170 can only be placed on a desktop or other surface
horizontally. Do not mount the HTB-100-HM170 onto a wall or other
mounting apparatus.