IEI Technology GRAND-C610-20C, User Manual

Page: 37 / 63

GRAND-C610-20C
Page 29
WARNING:
The following instructions should only be performed by an authorized and
trained technician.
Before starting, please ensure that you turn off the GRAND-C610-20C,
disconnect the power adaptor, network cable(s), and also remove any other
device/cable that is attached to the server.
Take Anti-Static precautions whenever maintenance is being carried out on
the system components. Failure to take anti-static precautions can cause
permanent system damage. For more details on anti-static precautions,
please refer to
Section 3.1 .
4.1 Component Replacement Procedure
WARNING!
Users are not advised to attempt to repair or replace any internal or external
components of the GRAND-C610-20C storage server other than those listed
below. If any other components fail or need replacement, contact the IEI
reseller or vendor you purchased the GRAND-C610-20C from or contact an
IEI sales representative directly. To contact an IEI sales representative,
please send an email to
sales@ieiworld.com .
The industrial server components listed below can all be replaced if they fail:

SO-DIMM module (see Section 3.4 )

Hard disk drive (see Section 3.6 )

Power supply unit

Fan module