IEI Technology FLEX-BX210 User Manual Download Page 54

Page: 54 / 126

FLEX-BX210

Page 40



Disabled

EFAULT

Disables CPU power management



Enabled

Enables CPU power management

4.3.2 PCH-FW Configuration

The

PCH-FW Configuration

menu (

BIOS Menu 4

) allows Intel® Active Management

Technology (AMT) options to be configured.

Aptio Setup – American Megatrends International, LLC.

Advanced

AMT BIOS Features

[Enabled]

Unconfigure ME

[Disabled]

> PTT Configuration

When disabled AMT BIOS
Features are no longer
supported and user is no
longer able to access MEBx
Setup.
Note:
This option does not
disable Manageability
Features in FW.

---------------------



: Select Screen

↑

↓

: Select Item

Enter

Select

General Help

Previous Values

Optimized Defaults

Save

ESC

Exit

BIOS Menu 4: PCH-FW Configuration



AMT BIOS Features [Enabled]

Use

AMT BIOS Features

option to enable or disable the Intel® AMT function.



Disabled

Intel® AMT is disabled



Enabled

EFAULT

Intel® AMT is enabled

Summary of Contents for FLEX-BX210































































































































Search results

Summary of Contents for FLEX-BX210

Reviews:

Related manuals for FLEX-BX210

Brands by name

Popular brands

IEI Technology FLEX-BX210, User Manual

Search results

Summary of Contents for FLEX-BX210

Reviews:

Related manuals for FLEX-BX210

Brands by name

Popular brands