IEI Technology F15AD-H81i/PC-R10 User Manual Download Page 66

Page: 66 / 185

PPC-FxxA-H81 Panel PC

Page 51

Step 1:

Identify the audio plugs

. The plugs on your home theater system or speakers

may not match the colors on the rear panel. If audio plugs are plugged into the

wrong jacks, sound quality will be very bad.

Step 2:

Plug the audio plugs into the audio jacks

. Plug the audio plugs into the audio

jacks. If the plugs on your speakers are different, an adapter will need to be used

to plug them into the audio jacks.

Step 0:

Line Out port (Lime):

Connects to a headphone or a speaker.

Microphone (Pink):

Connects to a microphone.

Figure 3-40: Audio Connector

NOTE:

If there is no audio device connected to the line-out port, the volume

icon on the Windows notification area displays

When the line-out port is connected with an audio device, the volume

icon will be displayed , allowing the user to adjust the volume and

open a file with audio.

Summary of Contents for F15AD-H81i/PC-R10


























































































































































































Search results

Summary of Contents for F15AD-H81i/PC-R10

Reviews:

Brands by name

Popular brands

IEI Technology F15AD-H81i/PC-R10, User Manual

Search results

Summary of Contents for F15AD-H81i/PC-R10

Reviews:

Brands by name

Popular brands