IEI Technology F15AD-H81i/PC-R10, User Manual

Page: 61 / 185

PPC-FxxA-H81 Panel PC
Page 46
Step 1:
Install the mounting brackets onto the rear panel (
Figure 3-29
). The required
number of mounting brackets may vary by models.
Step 2:
Slide the rear of the PPC-FxxA-H81 flat panel PC through the rack/cabinet
bracket until the aluminum frame is flush against the front of the bracket
(
Figure 3-35
).
Figure 3-35: The Rack/Cabinet Bracket
Step 3:
Insert the mounting clamps into the mounting brackets and pre-formed holes
along the edges of the PPC-FxxA-H81, behind the aluminum frame
(
Figure 3-36
). The required number of mounting clamps may vary by models.
Step 4:
Tighten the screws that pass through the mounting clamps until the plastic caps
at the front of all the screws are firmly secured to the bracket (
Figure 3-36
).