IEI Technology F15AD-H81i/PC-R10 User Manual Download Page 35

Page: 35 / 185

PPC-FxxA-H81 Panel PC

Page 20

3.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the maintenance of the EP

series may result in permanent damage to the EP series and severe

injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the PPC-FxxA-H81. Dry climates are especially susceptible to ESD. It is

therefore critical that whenever the PPC-FxxA-H81 is accessed internally, or any other

electrical component is handled, the following anti-static precautions are strictly adhered

to.

Wear an anti-static wristband

: - Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

Self-grounding

: - Before handling the board touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

Use an anti-static pad

: - When configuring the PPC-FxxA-H81, place it on an

anti-static pad. This reduces the possibility of ESD damaging the

PPC-FxxA-H81.

Only handle the edges of the PCB

: - When handling the PCB, hold the PCB

by the edges.

3.2 Installation Precautions

When installing the panel PC, please follow the precautions listed below:

Power turned off

: When installing the panel PC, make sure the power is off.

Failing to turn off the power may cause severe injury to the body and/or

damage to the system.

Certified Engineers

: Only certified engineers should install and modify

onboard functionalities.

Summary of Contents for F15AD-H81i/PC-R10


























































































































































































Search results

Summary of Contents for F15AD-H81i/PC-R10

Reviews:

Brands by name

Popular brands

IEI Technology F15AD-H81i/PC-R10, User Manual

Search results

Summary of Contents for F15AD-H81i/PC-R10

Reviews:

Brands by name

Popular brands