IEI Technology EP-265-910, Use Manual

Page: 71 / 145

EP-265-910/EP-267-910 Enrich POS System
Page 57
Step 4: Locate the wireless module
. The wireless module is located below the DIMM
sockets. See
Figure 5-3
.
Figure 5-3: Wireless Module Location
Step 5: Open the Mini PCIe socket arm clips
. The Mini PCIe socket has two clips that
secure the Mini PCIe wireless module into the socket. Before the wireless
module can be removed from the socket, the clips must be opened.
Step 6: Remove the wireless module
. Once the two clips of the Mini PCIe socket are
open, remove the wireless module from the socket.
Step 7: Align the new wireless module with the Mini PCIe socket
. The wireless
module must be oriented in such a way that the notch in the wireless module
must be aligned with the plastic bridge in the socket.
Step 8: Insert the wireless module
. Push the wireless module into the socket at an
angle.
Step 9: Secure the wireless module
. Push the wireless module down until the two
clips into place, securing the card in place.
5.4.5 Motherboard Replacement
A user cannot replace a motherboard. If the motherboard fails it must be shipped back to
IEI to be replaced. If the system motherboard has failed, please contact the system vendor,
reseller or an IEI sales person directly.