IEI Technology EP-265-910, Use Manual

Page: 129 / 145

EP-265-910/EP-267-910 Enrich POS System
Page 115
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the EP series.
C.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
C.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
Follow the electrostatic precautions
outlined below whenever the EP
series is opened.
Make sure the power is turned off and the power cord is disconnected
whenever the EP series is being installed, moved or modified.
Do not apply voltage levels that exceed the specified voltage range
.
Doing so may cause fire and/or an electrical shock.
Electric shocks can occur
if the EP series chassis is opened when the EP
series is running.
Do not drop or insert any objects
into the ventilation openings of the EP
series.
If considerable amounts of dust, water, or fluids enter the EP series
, turn
off the power supply immediately, unplug the power cord, and contact the EP
series vendor.
DO NOT
:
o
Drop the EP series against a hard surface.
o
Strike or exert excessive force onto the LCD panel.
o
Touch any of the LCD panels with a sharp object
o
In a site where the ambient temperature exceeds the rated temperature