IEI Technology ECK-1000 Series, User Manual

Page: 72 / 102

ECK-1000 Embedded System
Page 60
WARNING:
Take Anti-Static precautions whenever maintenance is being carried out on the
system components. Failure to take anti-static precautions can cause
permanent system damage. For more details on anti-static precautions, please
refer to Error! Reference source not found..
6.1 ECK-1000 System Maintenance Overview
NOTE:
When doing maintenance operations on the system, please follow the
instructions in this chapter. Failure to follow these instructions may lead to
personal injury and system damage.
To preserve the working integrity of the ECK-1000 embedded system, the system must be
properly maintained. If embedded system components need replacement, the proper
maintenance procedures must be followed to ensure the system can continue to operate
normally.
6.2 System Troubleshooting
This section provides some simple troubleshooting suggestions.
6.2.1 The System Doesn’t Turn On
If after turning the system on, there is no power (indicated by the power LED on the front
panel not turning on) please do the following:
Step 1: Check that the power cable connector is properly connected to the power socket
on the system rear panel.
Step 2: Check that the power cable connector is properly plugged into the power source.