IEI Technology DM-F65A/R, User Manual

Page: 43 / 130

DM-F Series Monitor
Page 27
3.1 Installation Precautions
CAUTION:
Some SKUs of the DM-F series have more than one power supply connection
point. To reduce the risk of electric shock, disconnect all power sources before
installing or servicing the DM-F series.
When installing the DM-F series LCD monitor, please follow the precautions listed below:

Read the user manual
: The user manual provides a complete description of the
DM-F series LCD monitor, installation instructions and configuration options.

DANGER! Disconnect Power
: Power to the monitor must be disconnected when
installing the DM-F series LCD monitor, or before any attempt is made to access
the rear panel. Electric shock and personal injury might occur if the rear panel of
the monitor is opened while the power cord is still connected to an electrical outlet.

Qualified Personnel
: The DM-F series LCD monitor must be installed and
operated only by trained and qualified personnel. Maintenance, upgrades, or
repairs may only be carried out by qualified personnel who are familiar with the
associated dangers.

Mounting
: Since the monitor may weigh up to 8 kg (not including a swing arm or
other accessories), please ensure at least two people assist with mounting the
monitor.

Air Circulation
: Make sure there is sufficient air circulation when installing the
monitor. Leave at least 5 cm of clearance around the monitor to prevent
overheating.

Grounding
: The monitor should be properly grounded. The voltage feeds must
not be overloaded. Adjust the cabling and provide external overcharge protection
per the electrical values indicated on the label attached to the back of the monitor.

Anti-static Discharge : The rear panel of the monitor must to be removed to
configure the monitor’s AD board. When doing so, be sure the monitor is
disconnected from its power source and take all necessary safety precautions to