IEI Technology DM-F65A/R, User Manual

Page: 39 / 130

DM-F Series Monitor
Page 23
2.1 Unpacking Procedure
To unpack the DM-F series LCD monitor, follow the steps below:
WARNING:
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the DM-F series LCD monitor
has been properly installed. This ensures the screen is protected during the
installation process.
Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4: Lift the monitor out of the boxes.
Step 5: Remove both polystyrene ends, one from each side.
Step 6: Pull the plastic cover off the DM-F series LCD monitor.
Step 7: Make sure all the components listed in the packing list are present. Step 0: