IEI Technology DM-F SERIES User Manual Download Page 81

Page: 81 / 130

DM-F Series Monitor

Page 65

5.1 Introduction

The touch panel controller enables analog resistive touch panels for four-wire, five-wire &

eight-wire models. The controller directly communicates with the PC system through the

touch panel communications interface. The controller design is superior in sensitivity,

accuracy, and friendly operation. The touch panel driver emulates the left mouse button

and the right mouse button functions.

The touch panel driver supports the following operating systems:



Microsoft

Windows

versions:

Microsoft

Windows

2000

Microsoft

Windows

Microsoft

Windows

2003

Microsoft

Windows

2008

Microsoft

Windows

Vista

Microsoft

Windows

Microsoft

Windows



Microsoft

Windows

CE versions:

Microsoft

Windows

CE 4.2

Microsoft

Windows

CE 5.0

Microsoft

Windows

CE 6.0



Linux Kernel 2.6



DOS

Driver installation is described below.

5.2 RS-232 or USB Touchscreen

Before installing the driver, connect the DM-F series monitor to the motherboard. The

DM-F series monitors support touchscreen modality through a USB or an RS-232

interface connection. Decide through which interface the touchscreen is to be controlled.

Summary of Contents for DM-F SERIES



































































































































Search results

Summary of Contents for DM-F SERIES

Reviews:

Brands by name

Popular brands

IEI Technology DM-F SERIES, User Manual

Search results

Summary of Contents for DM-F SERIES

Reviews:

Brands by name

Popular brands