IEI Technology AFOLUX AFL-315AW/B, User Manual

Page: 58 / 198

AFOLUX Kiosk Application Series
Page 42
Figure 4-3: CF Card Insert
Step 3: Reinstall the HDD bracket and the rear panel
. Make sure the HDD bracket
and the rear panel are properly secured with the previously removed retention
screws.
Step 0:
4.7 Jumper Settings
NOTE:
A jumper is a metal bridge used to close an
electrical circuit. It consists of two or three metal
pins and a small metal clip (often protected by a
plastic cover) that slides over the pins to connect
them. To CLOSE/SHORT a jumper means
connecting the pins of the jumper with the plastic
clip and to OPEN a jumper means removing the
plastic clip from a jumper.
Figure 4-4: Jumper Locations