IEI Technology AFL3-W15C, User Manual

Page: 49 / 144

AFL3-W15C/W19C-ULT3 Panel PC
Page 33
3.12 Mounting the System
The methods of mounting the AFL3-W15C/W19C-ULT3 are listed below.
 Wall mounting
 Panel mounting
 Rack mounting
 Arm mounting
 Stand mounting
The mounting methods are described below.
3.12.1 Wall Mounting
To mount the flat bezel panel PC onto the wall, please follow the steps below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
Figure 3-21
).