IEI Technology AFL3-12A-BT, User Manual

Page: 47 / 142

AFL3-W10A/12A/W15A-BT Panel PC
Page 33
The D-sub 9 connector pinouts of the RJ-45 to DB-9 cable are listed below.
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 NDCD1 6 NDSR1
2 NRX1 7 NRTS1
3 NTX1 8 NCTS1
4 NDTR1 9 NRI1
5 GND
Table 3-5: DB-9 Serial Port (COM1) Pinouts
3.12 Mounting the System
The methods of mounting the AFL3-W10A/12A/W15A-BT are listed below.

Wall mounting

Panel mounting

Rack mounting

Arm mounting

Stand mounting

V-Stand mounting
The mounting methods are described below.
3.12.1 Wall Mounting
To mount the flat bezel panel PC onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.