IEI Technology AFL2-W15A-N270/L325, User Manual

Page: 70 / 165

AFL2-W15A-N270/L325 Panel PC
Page 58
3.3.2 IDE Configuration
Use the
IDE Configuration
menu (BIOS Menu 4) to change and/or set the configuration
of the IDE devices installed in the system.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
IDE Configuration
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
OnChip SATA Channel [Compatible]
OnChip SATA Type [Native IDE]
> Primary IDE Master
: [Not Detected]
> Primary IDE Slave : [Hard Disk]
> Secondary IDE Master : [Hard Disk]
> Secondary IDE Slave : [Not Detected]
> Third IDE Master : [Not Detected]
> Third IDE Slave : [Not Detected]
Options
Disabled
Compatible
Enhanced
ÅÆ
Select Screen
↑ ↓
Select Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 4: IDE Configuration
Î
OnChip SATA Channel [Enabled]
Use the
ATA/IDE Configuration
option to configure the ATA/IDE controller.
Î
Disabled
Disables the on-board ATA/IDE controller.
Î
Enabled D
EFAULT
The SATA drive is configured on an IDE channel.
Î
OnChip SATA Type [Native IDE]
Use the
OnChip SATA Type
option to configure SATA devices as normal IDE devices.
Î
Native IDE D
EFAULT
Configures SATA devices as normal IDE device.
Î
RAID
Used when a RAID setup is installed
Î
AHCI
Enables advanced SATA drive features