IEI Technology AFL2-W15A-N270/L325, User Manual

Page: 36 / 165

AFL2-W15A-N270/L325 Panel PC
Page 24
Description Label Type
CF card setup J2 2-pin header
Clear CMOS J_CMOS1 3-pin header
COM1 Pin 9 setting JP7 10-pin header
COM3 Pin 9 setting JP8 6-pin header
COM3 RX RS-232/422/485 select JP11 8-pin header
COM3 RS-232/422/485 select JP9 12-pin header
COM3 TX RS-422/485 select JP10 6-pin header
Table 2-5: AFL2-W15A-L325 Jumpers
2.7.1 Access the Jumpers
To access the jumpers, please remove the back panel and the internal aluminum chassis.
To remove the back panel, please refer to
Section 4.3
.
2.7.2 CF Card Setup
Jumper Label: JCF1 (AFL2-W15A-N270)
J2 (AFL2-W15A-L325)
Jumper Type:
2-pin header
Jumper Settings:
See
Table 2-6
Jumper Location:
See
Figure 2-9
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in Table 2-6.
CF Setup Description
Open Master (Default)
Closed Slave
Table 2-6: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 2-9.