IEI Technology AFL2-17A-H61 Series, User Manual

Page: 74 / 278

AFL2-17A/AB-H61
P a g e 54
Figure 5-6: Insert the K-type Temperature Sensor Cable
S te p 3:
Insert the K-type connector. Gently insert the K-type temperature sensor cable.
The connector should engage with a gentle push.
5.6 RFID Re a d e r (Op tio n a l)
The AFL2-17A/AB-H61 series (selected models only) supports RFID reader function. The
RFID reader is located at the bottom of the screen. An optional Mifare 13.56 MHz or EM
125 KHz RFID reader can be integrated in the system. All the data on the RFID tag can be
easily retrieved or updated through the reader to secure the data transmission process
and increase efficiency for certain identity group.
To install the RFID reader, follow the steps below.
S te p 1:
Connect the RFID USB cable to the USB connector on the RFID reader module.
(Figure 5-7)
Figure 5-7: Connect the RFID USB cable