IEI Technology AFL2-12A-HM65 Series, User Manual

Page: 59 / 186

AFL2-12A-HM65 Series Panel PC
Page 59
Pin RS-422 RS-485
1 RX+
2 RX-
3 TX+ DATA+
4 TX- DATA-
Table 4-2: RS-422/485 Serial Port Pinouts
To install the RS-422/485 devices, follow the steps below.
Step 1: Locate the RS-422/RS485 connector . The location of the RS-422/RS-485
connector is shown in Figure 1-6 .
Step 2: Connect the RS-422/485 connector to the RS-422/485 cable. The
RS-422/485 cable can be found in the packing list and is shown in Figure 4-20 .
Figure 4-20: RS-422/485 Cable
Step 3: Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the RS-422/485 cable.
Step 4: Secure the connector . Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
The DB-9 connector pinouts are listed below. Step 0:
Figure 4-21: DB-9 Connector