IEI Technology AFL2-12A-HM65 Series User Manual Download Page 165

Page: 165 / 186

AFL2-12A-HM65 Series Panel PC

Page 165

WARNING:

All data in the system will be deleted during the system recovery.

Please backup the system files before restoring the system (either

Factory Restore or Restore Backup).

C.5.1 Factory Restore

To restore the factory default image, please follow the steps below.

Step 1:

Type <

> and press <

Enter

> in the main menu.

Step 2:

The Symantec Ghost window appears and starts to restore the factory default. A

factory default image called

iei.GHO

is created in the hidden Recovery partition.

Figure C-34: Restore Factory Default

Step 3:

The screen shown in

Figure C-35

appears when completed. Press any key to

reboot the system.

Summary of Contents for AFL2-12A-HM65 Series



























































































































































































Search results

Summary of Contents for AFL2-12A-HM65 Series

Reviews:

Related manuals for AFL2-12A-HM65 Series

Brands by name

Popular brands

IEI Technology AFL2-12A-HM65 Series, User Manual

Search results

Summary of Contents for AFL2-12A-HM65 Series

Reviews:

Related manuals for AFL2-12A-HM65 Series

Brands by name

Popular brands