IEI Technology AFL-xxA-N26 User Manual Download

Page: 75 / 152

AFL-xxA-N26 Series Panel PC

Page 75

Wake System with Fixed Time [Disabled]

Use the

Wake System with Fixed Time

option to specify the time the system should be

roused from a suspended state.

Disabled D

EFAULT

The real time clock (RTC) cannot generate a wake

event

Enabled

If selected, the following appears with values that

can be selected:

*Wake up every day

*Wake up date

*Wake up hour

*Wake up minute

*Wake up second

After setting the alarm, the computer turns itself on

from a suspend state when the alarm goes off.

5.3.3 CPU Configuration

Use the

CPU Configuration

menu (

BIOS Menu 5

) to enter the

CPU Information

submenu or enable Intel Virtualization Technology.

Summary of Contents for AFL-xxA-N26

























































































































































Search results

Summary of Contents for AFL-xxA-N26

Reviews:

Related manuals for AFL-xxA-N26

Brands by name

Popular brands

IEI Technology AFL-xxA-N26, User Manual

Search results

Summary of Contents for AFL-xxA-N26

Reviews:

Related manuals for AFL-xxA-N26

Brands by name

Popular brands