IEI Technology AFL-9652 Series, User Manual

Page: 57 / 199

Page 39
Figure 4-12: Secure the Panel PC
4.8.2 Panel Mounting
To mount the AFL-9652 series flat panel PC into a panel, please follow the steps below.
Step 1:
Select the position on the panel to mount the flat panel PC.
Step 2:
Cut out a section from the panel that corresponds to the rear panel dimensions
of the flat panel PC. Take care that the panel section that is cut out is smaller
than the overall size of the metal frame that surrounds the flat panel PC but just
large enough for the rear panel of the flat panel PC to fit through (Figure 4-13
,
Figure 4-14 and Figure 4-15).