IEI Technology AFL-9652 Series User Manual Download Page 4

Page: 4 / 199

Page IV

Manual Conventions

WARNING!

Warnings appear where overlooked details may cause damage to the equipment or result

in personal injury. Warnings should be taken seriously. Warnings are easy to recognize.

The word “warning” is written as “

WARNING

,” both capitalized and bold and is followed by

text. The text is the warning message. A warning message is shown below:

WARNING:

This is an example of a warning message. Failure to adhere to warning

messages may result in permanent damage to the AFL-9652 series or

personal injury to the user. Please take warning messages seriously.

CAUTION!

Cautionary messages should also be heeded to help reduce the chance of losing data or

damaging the AFL-9652 series. Cautions are easy to recognize. The word “caution” is

written as “

CAUTION

,” both capitalized and bold and is followed. The italicized text is the

cautionary message. A caution message is shown below:

CAUTION:

This is an example of a caution message. Failure to adhere to cautions

messages may result in permanent damage to the AFL-9652 series.

Please take caution messages seriously.

Summary of Contents for AFL-9652 Series








































































































































































































Search results

Summary of Contents for AFL-9652 Series

Reviews:

Related manuals for AFL-9652 Series

Brands by name

Popular brands

IEI Technology AFL-9652 Series, User Manual

Search results

Summary of Contents for AFL-9652 Series

Reviews:

Related manuals for AFL-9652 Series

Brands by name

Popular brands