iEi Integration Corp. POC-17i User Manual Download Page 88

Page: 88 / 129

POC-17i/19i Series

Page 74



Save Changes and Reset

Use the

Save Changes and Reset

option to save the changes made to the BIOS options

and reset the system.



Discard Changes and Reset

Use the

Discard Changes and Reset

option to exit the system without saving the

changes made to the BIOS configuration setup program.



Restore Defaults

Use the

Restore Defaults

option to load the optimal default values for each of the

parameters on the Setup menus.

F3 key can be used for this operation.



Save as User Defaults

Use the

Save as User Defaults

option to save the changes done so far as user defaults.



Restore User Defaults

Use the

Restore User Defaults

option to restore the user defaults to all the setup options.

Summary of Contents for POC-17i


































































































































Search results

Summary of Contents for POC-17i

Reviews:

Related manuals for POC-17i

Brands by name

Popular brands

iEi Integration Corp. POC-17i, User Manual

Search results

Summary of Contents for POC-17i

Reviews:

Related manuals for POC-17i

Brands by name

Popular brands