iEi Integration Corp. POC-17i User Manual Download Page 58

Page: 58 / 129

POC-17i/19i Series

Page 44

4.3 Turn off the Power

WARNING:

Failing to turn off the system before opening it can cause permanent

damage to the system and serious or fatal injury to the user.

Before any maintenance procedures are carried out on the system, make sure the system

is turned off.

4.4 Replacing Components

4.4.1 Memory Module Replacement

The flat panel PC features two DDR3 dual-channel SO-DIMM sockets supporting a

system max of 8GB. If the memory module fails, follow the instructions below to replace

the memory module.

Step 1:

Remove the back cover. See

Section 3.4.

Step 2:

Remove the internal aluminum back cover. See

Section

3.5

Step 3:

Remove four (4) retention screws securing the HDD bracket to the chassis. See

the following figure.

Summary of Contents for POC-17i


































































































































Search results

Summary of Contents for POC-17i

Reviews:

Related manuals for POC-17i

Brands by name

Popular brands

iEi Integration Corp. POC-17i, User Manual

Search results

Summary of Contents for POC-17i

Reviews:

Related manuals for POC-17i

Brands by name

Popular brands