ieGeek ZS-GQ2, User Manual

Page: 11 / 52

5
EN
Scan QR Code
Input Wi-Fi
Password
Wait for
Connection
Device Added
My camera fails to connect Wi-Fi?
1. Before adding a device, make sure that the device is in the state of
slow flashing.red light. If the indicator status is abnormal, please
restore the device to factory settings(long press and hold the device
RESET button until you hear the 'boogu'Sound)
2. Please make sure the Wi-Fi the camera connected is 2.4GHz. In our
experience, network connection is failed in most cases, which is
caused by that users used 5GHz WIFI.
3. Make sure the password correction of the Wi-Fi. (Note:the password
of the WiFi cannot include single quote, underline, space and virgule ).
4. Check the number of the devices your router connected. In general,
the router has a connection limits. Once the devices that your router
connected excess the its max limit numbers, other devices will
cannot connect the router.
5. Make sure the QR code on the phone screen is normal and the
distance between the phone and the camera lens is 10-15cm (3.9-
5.9inch) during the scanning process.