7
3. Installation
3.1 Opening and inspecting packing crates
Note:
Prevent the crate cover from warping when placed
at an angle. Place the packing crate level.
Note:
•
Only complete the installation when all parts are present and undamaged.
•
Inform IECHO customer service if any parts are missing or damaged.
•
Replenish or replace missing or damaged parts.
A
Remove all screws on the upper side of the packing crate.
B
Remove all the fixed support (1).
C
Lifting all the machine feet (2), and then push machine down slowly from packing crate.
Summary of Contents for PK-0604
