IECHO PK-0604, User Manual

Page: 22 / 25

22
8. Operating
8.1 Preparation

Before starting, ensure there is nobody on the working area.

Be sure to finish the platform before starting, ensure no sundry in the X/Y chain during the process.

Check whether there is lubricating oil in Y guide.

Check whether the air pressure reaches 0.6Mpa.

Check whether it is correct with tools and installation.
8.2 Operating

Power on.

The machine starts re-set. Re-setting procedures: X/Y direction re-setting, cutting head rotation re-setting, cutting
head move to the original place.

In order to avoid cutting the felt, please adjust the depth of knives.

Put the materials on the table, start the vacuum pump, which make the materials to be adsorbed on the table.

Open “IECHO Digital cutting system”, import the files (DXF or PLT). The system will process the analysis of
outline, definition the cutting tool and definition the cutting type.

Start the vacuum pump, move the cutting head, select infrared ray point in CutterServer, review the cutting area. If
the material is not in the reviewing area or exceeds, please adjust the material.

Click cutting icon after confirming, the machine will start to cut.

After finishing cutting, please turn off machine and other relevant switch.