Hangzhou IECHO Science & Technology Co., Ltd.
2
1. Summary
The 450 Router adopts German imported electric spindle as the core body of
the milling tool, with stable speed and superior performance. It is suitable for
engraving and engraving of non-metallic hard materials, such as acrylic board, MDF
board, aluminum-plastic board, Foam board and other materials. The operation is
simple and it can be widely used in industries such as advertising and composite
materials.
2. Risk control warning
If there is a safety hazard, please immediately press the
emergency stop button!
Do not touch the router bit with your hands when it is
rotating!
3. Milling system composition and working principle
450 milling system is composed of 450 milling tool (including spindle), Router
controller, vacuum cleaner, dust suction pipeline, air cooling pipeline and other
components. As shown in Figure 1 for the connection diagram of the main parts of
the milling system, the milling tool is installed on the universal head, and it is
connected with the driver in the router control box through a flexible cable. A milling
system suction device is installed on the universal head, and the suction device is
directly connected with an external vacuum cleaner through a vacuum hose.
In the system, when the milling tool is running, the external driver provides the
required power, and then the cutting head controls the height of the router to
engrave and mill the material to be cut. During the working process, the milling
system suction component sucks the waste and dust cut by the milling tool. With the
vacuum cleaner, it generates a negative pressure suction to the vacuum cleaner, to
achieve the purpose of clean production table.
