![background image](http://html.mh-extra.com/html/idtronic/bluebox-panel-reader-lf/bluebox-panel-reader-lf_manual_618907006.webp)
BLUEBOX Panel Reader
Page 6 of 36
1
Introduction
The
PANEL READER RFID LF (Ø22)
hereinafter named
BLUEBOX
is a
read/write 125 kHz
RFID device that communicates with a ‘host’ system
(typically a PC) through an USB interface. The
BLUEBOX
acts as a joint through
a set of commands between the host system and a RFID tag (or transponder)
present near the antenna.
A software driver must be installed at the ‘host’ (PC)
level to allow the USB connection of the
BLUEBOX
to appear as a serial port
(COM). It is also possible to configure the
BLUEBOX
to send a message as an
HID Keyboard with Italian layout (keyboard emulation).
Hereinafter the list of the supported O.S.
•
Windows XP SP3 32/64 bit
•
Windows Vista 32/64 bit
•
Windows 7 32/64 bit
•
Windows 8/8.1 32/64 bit
•
Windows 10 32/64 bit
From a mechanical point of view, the
BLUEBOX
, easy to assemble, consists of
four main components as shown:
•
the antenna placed in the front element of the device with a diameter of
Ø28 visible on the panel,
•
the M22 ring nut for fixing the device on rear of the panel,
•
the fixing support of the device, which is placed between the back of the
panel and the fixing ring of the device itself,
•
the device that connects to the antenna with strip coupling and is fixed to
the support by means of 2 M3x6 screws.
Summary of Contents for BLUEBOX Panel Reader LF
Page 1: ...BLUEBOX Panel Reader Page 1 of 36 125 kHz RFID System BLUEBOX Panel Reader LF ...
Page 26: ...BLUEBOX Panel Reader Page 26 of 36 10 Mechanical dimensions Dimensions in mm ...
Page 32: ...BLUEBOX Panel Reader Page 32 of 36 5 On the next screen choose Advanced Options ...
Page 33: ...BLUEBOX Panel Reader Page 33 of 36 6 Then click on Startup Settings ...