![background image](http://html.mh-extra.com/html/idtronic/bluebox-panel-reader-lf/bluebox-panel-reader-lf_manual_618907009.webp)
BLUEBOX Panel Reader
Page 9 of 36
In case of a ‘spontaneous’ message send error, due to a connection
or communication error, no further attempts will be made and the
tag will be discarded!
BLUEBOX
will hold onto a maximum of 20 tags when configured
to use the ‘spontaneous’ message.
Once the 20 tag limit is reached,
the new tags will be discarded!
The
BLUEBOX
allows the execution of ‘on request’ functions.
During the
execution of these functions, the ‘continuous’ identification activity will be
suspended temporarily; the involved commands are relative to device
configuration and tag read/write specific activities.
If not required, the ‘continuous’ identifica
tion activity can be disabled through a
flag defined in the general parameters. In this case, the
BLUEBOX
will only
execute the ‘on request’ commands already defined above.
3.1
General Parameters
This section provides details on the configurable general parameters of the
BLUEBOX
.
Parameter
Description
Range
Default
Device
Address
Device address of the reader.
000 … 255
255
Baud Rate
Baud rate on USB Virtual COM interface.
1200
2400
4800
9600
19200
38400
57600
115200
19200
Data Bits
Data bits on USB Virtual COM interface.
7
8
8
Stop Bits
Stop bits on USB Virtual COM interface.
1
2
1
Parity
Parity on USB Virtual COM interface.
None
None
Summary of Contents for BLUEBOX Panel Reader LF
Page 1: ...BLUEBOX Panel Reader Page 1 of 36 125 kHz RFID System BLUEBOX Panel Reader LF ...
Page 26: ...BLUEBOX Panel Reader Page 26 of 36 10 Mechanical dimensions Dimensions in mm ...
Page 32: ...BLUEBOX Panel Reader Page 32 of 36 5 On the next screen choose Advanced Options ...
Page 33: ...BLUEBOX Panel Reader Page 33 of 36 6 Then click on Startup Settings ...