9
(1) The upper of two LEDs still display green color. It means that open the door.
With the rest of LEDs, they indicate whether authentication or not.
9-5. When a key tag is deleted or registered
(1) If master card nears the product, buzzer sounds one time and the upper of 3 LEDs turn green.
(2) If a key tag that wish to register new is read by the product, buzzer sounds one time.
And the rests except the upper of 3 LEDs turn green. From the top to the under, they are off in order.
When all LEDs are off, LEDs turn red again. At this time, a key tag is registered.
(3) If a key tag is already registered, buzzer sounds twice.
The rests except the upper of 3 LEDs turn red.
They repeat on/off twice and become on. At this time, a key tag is deleted.
(4) After finishing to register or delete a key tag, if reading a master card again, the upper of 3
LEDs turn red with beeping one time.
And all LEDs turn red.
9-6. When a master card is deleted or registered again
e.g.) the lost or the change of a master card.
(1) As power off, they make white and blue wire close.
(2) As power on, all LEDs turn red color with beeping twice.
Then they repeat twice and become on.
At this time, a master card is deleted.
(3) After finishing to delete a master card, be off the power.
Connect again white and blue wire to a device which has been connected basically.
(4) As power off, RFL200 / IP-RFL200 operates normally.
At this time, a card which had been first read on RFL200 / IP-RFL200 is registered as a master
card. If you make already registered user card read, it will be deleted and then registered as master
card.
9-7. When a product is initialized
(1) As power off, make white, green and yellow wire are close.
(2) As power on, all LEDs turn red or green color. After repeating on/off twice, they become off.
(3) As the power off, only green LED turn on from the under to the top. All LEDs become green.
(4) RFL200 / IP-RFL200’s buzzer sounds four times. It indicates to complete initialization.
(5) After finishing to initialize, connect again white, green and yellow wire to a device which had been
basically connected as power off.
(6) If turn on power, RFL200 / IP-RFL200 operates normally.
At this time, a card which had been first read on RFL200 / IP-RFL200 is registered as a master
card.
