Initialization
4
p.11
1
Basic operations
1.1
Initial state (when the power is supplied)
When you apply power to the reader, it will sound a beep before entering Standby with the
red indicator turned on.
1.2
Using the card
Present the card to the reader until you hear a beep and the red indicator turns green.
When the reader has transferred the card data to the controller, it returns to Standby
with the red indicator turned on and waits for reading the next card.
1.3
LED Control
You can control the LED indicator of the device at your preference.
Connect the LED control input line (yellow) to the NO port of the controller relay output,
and GND to the COM port.
Set the I/O of the controller so that you can change the color of the LED indicators. While
the LED control is working, the green indicator stays solid.
This function not only enables you to change the color representing Standby from red to
green, but it can be also applied to make various modifi cations according to the different
I/O settings of the controller.
For more information about the I/O settings of the controller, refer to the user manual of
the controller.
