IDTECK LX007, Manual, Page: 78 / 107

Setting Changes p.70
○
‘3’ – ID + Pa Fingerprint
●
MB
Refers to the Operating Mode that the new cardholder will use on Reader*2 (Exit Reade
r).
○
‘0’ – Depend on System Operating Mode ([F1 SETUP MENU] > [READER*2 MODE])
○
‘1’ – ID Only Mode
○
‘2’ – ID + Password Mode
You cannot apply the ID + Password Mode if Reader#2 does not have a keypad or
does not use password verification.
●
LV
Refers to the Output Operating Level for the new cardholder. Output operating time ca
n be set for each user. To define an output operating time for each level, refer to the ins
tructions on Output Setting in [F6 SETUP MENU].
○
‘0’ or ‘1’ – Level *1
○
‘2’ – Level *2
○
‘3’ – Level *3
○
‘4’ – Level *4
●
FP
FP is the Fingerprint Usage Flag (1 digit). You can decide whether or not the user will us
e a fingerprint.
○
‘0’ – Not using a fingerprint
○
‘1’ – Using a fingerprint
7.2 ID Delete
Registered IDs can be deleted from the LX007 by presenting the card or entering the ID num
ber. After entering the ID DELETE mode, present the card you want to delete. Alternatively,
you may enter an 8 digit ID number and press <ENT> key from the keypad. The ID number w
ill appear on the LCD and that ID will be removed from the device and the “ID DELETED” mes