p.43
NOT USE
4.6
Reader Test
Reader Test allows you to test the reader(s). To begin the test, press <ENT>. While the LCD d
isplays “SCANNING”, present a card to the reader you would like to test, and the LCD will dis
play the reader number and the card number. After the test is finished, press <ESC> to exit.
Reader#1 refers to the built-in reader of the RFK505, and Reader #2 refers to an e
xternal reader.
You can also use Reader Test to check the number of a card. Master number of SR
505 is in the range of 10digits.
4.7
Input / DIP Switch Test
Input Test allows you to check the status of Input Ports and DIP switches (Communication A
ddress Setting Switches). To begin the test, press <ESC>.
DIP Switch
1=ON, 2=OFF (It shows how the DIP switch on the back of the RFK505 is set.)
Input 1-4
0=OFF (Disabled)
1=ON (Enabled)
2=Input Disconnected
Summary of Contents for IDTECK SRK505
Page 1: ......
Page 22: ...Installation Checkpoints Tips p 18 ...
Page 44: ...Setting Changes p 40 4 NOT USE 4 1 Firmware Version ...
