IDTECH ValueScan II, User Manual

Page: 30 / 98

29
Scan
Global min./max. code length: Global Minimum and
Maximum length can be set to qualify data entry. The length
is defined as the actual barcode data length to be sent.
Labels with lengths which exceeds these limits will be
rejected. Make sure that the Minimum length setting is no
greater than the Maximum length setting, or otherwise the
labels of the symbology will not be readable. In particular,
you can set the same value for both Minimum and Maximum
reading length to force the fixed length barcode decoded.
The values of setting have no effect on certain symbologies
with fixed length.
Notes 1): Please set the min/max length if you have a special
demand for individual barcode.
2): Include the Check sum digits if you want to set
Global min/max code length.
Inverted image scan: Set to Enabled, the scanner will scan
both black/white barcode with white/black background.
CTS trigger: This operation enables an external device to
control scanning. The CTS trigger is controlled by appling an
external trigger signal to the CTS input. When active, this
signal causes scanning to begin as the scanner
‟s trigger is
depressed.
Position indication: This function can indicate the specific
location before scanning. You can also set up the time of
indication.