IDTECH SecureHead User Manual Download Page 29

Page: 29 / 76

Page 29 of 76

User Manual, SecureHead USB and UART Interface

1: Track 1 sampling data exists (0: Track 1 sampling data does not exist)

1: Track 2 sampling data exists (0: Track 2 sampling data does not exist)

1: Track 3 sampling data exists (0: Track 3 sampling data does not exist)

1: Track 1 decode success (0: Track 1 decode fail)

1: Track 2 decode success (0: Track 2 decode fail)

1: Track 3 decode success (0: Track 3 decode fail)

0: if b0 to b5 are all 1, otherwise 1 (make it printable)

Read Error byte 2:

B12

B11

B10

1: Track 4 sampling data exists (0: Track 4 sampling data does not exist)

1: Track 4 JIS II decode success (0: Track4 JIS II decode fail)

B9, B10, B11

000: ISO Card (7, 5) or (7, 5, 5) encoding

001: Old CADL Card (6, 5, 6) encoding (no longer included)

010: AAMVA Card (7, 5, 7) encoding

011: JIS I Card (8, 5, 8) encoding

100: JIS II card (8) or ISO+JIS II

110: OPOS Raw Data Output

111: JIS I + JIS II

B12

Reserved for future use

Decode flag will set to 1 (B3, B4 and B5 all set to 1) in OPOS raw data mode.

Track ID

Track ID is a byte of ID, it will be '1', '2' and '3' for track 1, 2 and 3; it is not accurate to use

start sentinel to identify track.

Track x Error

Track x error is a byte of flags, it will be in format of: 0 0 1 b4, b3, b2 b1 b0

1: Start sentinel error (0: Not start sentinel error)

1: End sentinel error (0: Not end sentinel error)

1: Parity error (0: Not parity error)

1: LRC error (0: Not LRC error)

1: Other error (0: Not other error)

Track x Error is set to 0x20 in OPOS raw data mode.

Track Length

Assume actual "Track x Data Length" is hex code xy; the Track x data length for OPOS mode

output will be hex code 3x, 3y.

Track x data length does not include the byte of "Track x data LRC", it is <30> <30> in case of

read error on track x.

Summary of Contents for SecureHead












































































Search results

Summary of Contents for SecureHead

Reviews:

Related manuals for SecureHead

Brands by name

Popular brands

IDTECH SecureHead, User Manual

Search results

Summary of Contents for SecureHead

Reviews:

Related manuals for SecureHead

Brands by name

Popular brands