background image

MiniSmart II User Manual 

 

Page | 2 

 

 
 
ID TECH 
10721 Walker Street,  
Cypress, CA90630  
Voice: (714) 761-6368 Fax: (714) 761-8880 

ID TECH, Inc. All rights reserved 

The information contained herein is provided to the user as a convenience. While every effort has 
been made to ensure accuracy, ID TECH is not responsible for damages that might occur because of 
errors or omissions, including any loss of profit or other commercial damage, nor for any 
infringements or patents or other rights of third parties that may result from its use. The 
specifications described herein were current at the time of publication but are subject to change at 
any time without prior notice. 
 

LIMITED WARRANTY 

ID TECH warrants to the original purchaser for a period of 12 months from the date of invoice that 
this product is in good working order and free from defects in material and workmanship under 
normal use and service. ID TECH’s obligation under this warranty is limited to, at its option, replacing, 
repairing, or giving credit for any product that returned to the factory of origin with the warranty 
period and with transportation charges and insurance prepaid, and which is, after examination, 
disclosed to ID TECH’s satisfaction to be defective. The expense of removal and reinstallation of any 
item or items of equipment is not included in this warranty. No person, firm, or corporation is 
authorized to assume for ID TECH any other liabilities in connection with the sales of any product. In 
no event shall ID TECH be liable for any special, incidental or consequential damages to purchaser or 
any third party caused by any defective item of equipment, whether that defect is warranted against 
or not. Purchaser’s sole and exclusive remedy for defective equipment, which does not conform to 
the requirements of sales, is to have such equipment replaced or repaired by ID TECH. For limited 
warranty service during the warranty period, please contact ID TECH to obtain a Return Material 
Authorization (RMA) number & instructions for returning the product. 
 
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR FITNESS FOR 
PARTICULAR PURPOSE. THERE ARE NO OTHER WARRANTIES OR GUARANTEES, EXPRESS OR 
IMPLIED, OTHER THAN THOSE HEREIN STATED. THIS PRODUCT IS SOLD AS IS. IN NO EVENT SHALL 
ID TECH BE LIABLE FOR CLAIMS BASED UPON BREACH OF EXPRESS OR IMPLIED WARRANTY OF 
NEGLIGENCE OF ANY OTHER DAMAGES WHETHER DIRECT, IMMEDIATE, FORESEEABLE, 
CONSEQUENTIAL OR SPECIAL OR FOR ANY EXPENSE INCURRED BY REASON OF THE USE OR 
MISUSE, SALE OR FABRICATIONS OF PRODUCTS WHICH DO NOT CONFORM TO THE TERMS AND 
CONDITIONS OF THE CONTRACT. 
 
ID TECH and Value through Innovation are trademarks of International Technologies & Systems 
Corporation. USB (Universal Serial Bus) specification is copyright by Compaq Computer Corporation, 
Intel Corporation, Microsoft Corporation, and NEC Corporation. Windows is registered trademarks of 
Microsoft Corporation. 

Summary of Contents for MiniSmart II














Reviews: