MiniSmart II User Manual
Page | 12
7.4.
Remote Key Injection Function
•
Compatible with Local POS Computer (LPC) for
Debit
and
Data Key Injection
.
•
Can communicate with Local POS Computer (LPC) via RS-232 port.
•
Can communicate with Local POS Computer (LPC) via USB port.
7.5.
Bootloader Function
The firmware can be upgraded via RS-232 or USB port in the field. The unit does not need to be sent
back to the manufacturer.
8.
APIs
8.1.
Set Idle Waiting Time
Command Body
78 53 01 05 01 <Time>
Where
:
<Time> is 4 seconds ~ 60 seconds
(Default is 4 seconds)
Response Body
06
Note:
The "Set Idle Waiting Time" is only available in the FW version V2.00.034 and
above.
8.2.
Get Idle Waiting Time
Command Body
78 52 01 05
Response Time
06 78 01 05 01 <Time>
Note
:
•
If waiting time is 0 and if interface is RS232, disable the device to work in
Low Power
Consumption
status.
•
If the waiting time is not 0, the Idle status is more than
<Time>,
the interface is RS232,
and the card is not seated, the device will enter
Low Power Consumption
status.
•
If the device receives a command in Idle status the waiting time will be reset.
•
If IC card is removed the waiting time will be reset.
