Page | 13
1.
Present the phone in close proximity to the front portion of the PiP.
2.
Orient the phone so that maximum surface area is parallel to the PiP.
3.
The phone used for the test should display a rewards screen (steps for using that screen depend on
the phone platform).
4.
The Lite-On Custom PiP beeps once to indicate a successful VAS transaction.
3.7.
Notes on Installation Locations
The LITE-ON CUSTOM PIP is designed to be mounted on a surface and in close proximity to any
internal motors and electrical devices that may be operating inside a point-of-sale area. However,
the LITE-ON CUSTOM PIP is susceptible to RF and electromagnetic interference. It is important that
the unit not be mounted near (within 3 or 4 feet) large electric motors, computer UPS systems,
microwave transmitters (Wi-Fi routers), anti-theft devices, radio transmitters, communications
equipment and so on.
Tie all cables neatly with nylon cable-ties and route them so that they are inaccessible and invisible
to customers.
Test the LITE-ON CUSTOM PIP installation using a test card to perform an end-to-end VAS
transaction. Even if the transaction is declined (as it should be with a test card), it will prove
connectivity all the way through the system. If possible, a manager or some other responsible party
should test each LITE-ON CUSTOM PIP on a regular basis (perhaps at the start of each day or at least
once per week) with a test card to ensure continued operation and functionality. If the LITE-ON
CUSTOM PIP is rebooted on a regular basis (such as every night), it is important to test the
contactless reader as soon as possible afterwards to ensure continued communication to the LITE-
ON CUSTOM PIP host.