Page | 12
3.2.
Mounting the Lite-On Custom PiP
Warning:
The RF field of the LITE-ON CUSTOM PIP is sensitive to the proximity of metal. There are three
options for mounting the LITE-ON CUSTOM PIP to a metal surface:
Lite-On Custom PiP must not be installed behind any metal surfaces or materials that have
metallic content, which blocks the RF field.
Mount Lite-On Custom PiP a minimum of 2cm away from any metal surface.
Keep the RF-emitting surface of Lite-On Custom PiP at least 2cm from any metal.
3.2.1.
Mounting Screws
The back of the LITE-ON CUSTOM PIP has fourth holes for mounting screws (4X Փ2.80). Make sure that
the depth of the screws used for mounting does not exceed 4mm.
3.3.
Connecting to Power
The Lite-On Custom PiP is powered through the System connector.
3.4.
Connecting to the Data Port
The Lite-On Custom PiP transfers data via the system connector by UART signal.
3.5.
Using the LITE-ON CUSTOM PIP for Value-Added Services
This tests the Lite-On Custom PiP’s ability to read an NFC phone or closed-loop tap card.
3.6.
Making a VAS Transaction
The LITE-ON CUSTOM PIP allows for customer loyalty program services using Contactless (NFC)
technology. To make a VAS transaction: