Page | 11
2.
Lite-On Custom PiP Specifications
Hardware
MTBF
50,000 POH (Minimum)
Transmitter Frequency
13.56 MHz +/- 0.01%
Transmitter Modulation
ISO 14443-2 Type A
Rise/Fall Time: 2-3 µsec. Rise, < 1 µsec fall
ISO14443-2 Type B
Rise/Fall Time: < 2 µsec. each; 8% - 14% ASK
Receiver Subcarrier
Frequency
847.5 KHz
Receiver Subcarrier Data
ISO 14443-2 Type A: Modified Manchester
ISO 14443-2 Type B: NRZ-L, BPSK
ISO 18092
ISO 21481 (PCD & NFC)
ISO 15693 (under evaluation / Hardware Ready)
Typical Read Range
0-4cm, depends on card type, setup environment
Physical
Length
78 mm
Width
53mm
Depth
4.8mm
Environmental
Operating Temperature
-40°C to 85°C (-40°F to 185°F) [non-condensing]
Storage Temperature
-40°C to 85°C (-40°F to 185°F) [non-condensing]
Operating Humidity
Maximum 95% (non-condensing)
Storage Humidity
Maximum 95% (non-condensing)
Transit Humidity
Maximum 95% (non-condensing)
Operating Environment
Outdoor
IK Rating
N/A
IP Rating
N/A
Electrical
Reader Input Voltage
+5V (UART port-powered)
Power Consumption
Idle mode: <1W
Polling mode: <2.5W
3.
LITE-ON CUSTOM PIP Installation
This section provides information on installing a Lite-On Custom PiP.
3.1.
Parts List
Verify that you have the following hardware for installing the Lite-On Custom PiP:
PIP OEM
Customized UART cable