IDTECH Econoscan, User Manual

Page: 4 / 66

GENERAL
INTRODUCTION
EZ TROUBLESHOOTING
. A001$
2
ID TECH's EconoScan CCD Scanner is specially designed to
deliver high-end bar code reading performance at the lowest
possible price. The scanner utilizes exceptional decoding
technology. One-time settings are easily made by scanning set-up
bar codes in this handy user's manual. The EconoScan enables
quick contact scanning of bar codes up to 3.5 inches in length.At
a scan rate of 150 scans per second, low-quality or damaged bar
codes, as well as small or high-density bar codes, can be read
with exceptional speed and accuracy. This rugged scanner contains
no moving parts, yet it is exceptionally lightweight and designed to
fit comfortably in the hand for extended periods of usage. The
cable is detachable for easy replacement or theuse of multiple
interfaces.
The EconoScan has many settings that can be used to conform the
unit to the requirements of a particular application. For most usages,
however,the default settings programmed into the unit at the factory
are appropriate.It is not recommended that the default settings be
changed unless thereis a specific need to alter the characteristics of
the scanner's performance.
The EconoScan is easy to install and use. Many problems
encountered can be attributed to a wrong setting that has been
programmed into the scanner. Before troubleshooting the problem,
try this:
1. Unplug the cable from the host computer.
2. Plug the cable back into the host computer.
3. Reset the scanner settings to DEFAULT (Group 1).
If these steps do not resolve the problem, please refer to the
troubleshooting table on the next page. If this fails to correct the
problem, please consult the troubleshooting section beginning on
page 59 for further assistance.