IDT ZWIR4532, User Manual

Page: 6 / 22

ZWIR4532 Evaluation Kit User Manual
© 2018 Integrated Device Technology, Inc. 6 November 1, 2018
2.3 Evaluation Kit Board Connections
Figure 1. Evaluation Kit Board Connections
2.3.1 Antenna
The antenna is to be 50Ω and examples are supplied in the evaluation kit. There is no matching network on the evaluation kit PCB if matching
is needed for other antennas
–
this has to be done after the SMA connector.
I2C Sensor
Connectors:
IDT FS2012
IDT Sensor Stick
Grove
JTAG programming connection.
Only used if the two sections
are separated
USB control connection and
kit power
Antenna SMA Connector
User Switches
Reset
Boot Select
Auxiliary Power via USB cable. Use
only when programming board is
separated from the EV Kit board
Ethernet Adapter connector
Indicator LEDs
3.3V to ZWIR4532
3.3V to Sensors
USB 5V input
User LED2
User LED1
Various
Jumpers to alter
the EV Kit setup